For example, if pin 1 on one end goes to pin 2 on the other end, then pin 2 on one end goes to pin 1 on the other end, and the other pins remain unaffected. In a crossover cable, pins do not correspond – some or all of the conductors are swapped at the terminations. In this case, the terminations are identical, so only one pinout is required. Using the same wiring scheme at each end yields a straight-through cable (a given color wire connects to a given number pin, the same at both ends). In a straight-through cable, pins on one end correspond exactly to the corresponding pins on the other end (pin 1 to pin 1, pin 2 to pin 2, etc.). Straight-through cables are used for most applications, but crossover cables are required in others. In contrast, a straight-through cable uses direct wiring to connect complementary devices, e.g. linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device.letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e.connecting two devices directly, output of one to input of the other,.The crossing of wires in a cable or in a connector adaptor allows: Such a distinction between devices was introduced by IBM.
A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink.
0 kommentar(er)
